From the page: Denim deserves a second life
Idea 9
Wall organizer with pockets
Hanging fabric organizers are a legacy of old workshops and barbershops, where every tool had its visible place. You can improve on the concept by fixing the fabric to a repurposed wooden rod (an old hanger or a leftover slat), because the wood distributes the weight of the full fabric across the wall instead of concentrating it all on two nails — the secret of anything hung that doesn't tear.
What you need
- The body of the jeans with all the pockets, cut into a rectangle
- A wooden slat or old wooden hanger, slightly wider than the fabric
- Nail or wall hook, hammer
- Needle and thick thread or machine
- Drill or small nail for the slat
How to make it
-
1
Cut the rectangle keeping the pockets distributed, at least about 50 × 60 cm — position the pockets at different heights, like in a shop window.
-
2
Reinforce the top of the fabric by folding and sewing a 4 cm hem, creating a firm channel.
-
3
Lightly sand the slat and make a hole in the center for hanging; hanger wood is already treated and doesn't warp easily.
-
4
Slide the slat through the fabric's channel; the weight now goes down through the wood instead of pulling the fabric stitch by stitch.
-
5
Fix a firm hook on the wall, preferably with the anchor suited to the wall type, and hang it — the rule is simple: a weak hook on a firm wall holds more than a strong hook on loose plaster.
Finishing touches
Leave one deep pocket at the bottom for an umbrella or a roll of tape. Paint or frame the slat for a more polished look.
This is one of the ideas from the full page — see all the possibilities.
This page feeds the collective knowledge 🌱 — every discovery makes the next answer better.